WM Motorcycle Tyre Changing Adapter is made to order so please allow up to 2 weeks for delivery upon purchase.

For fitting and removing tyres, the wheel sits into the arm claws of the stand as normal

To centre the wheel use the cone/quick spin thumb wheel and secure with the three cam straps provided with the kit to the arms, (the straps will also prevent the wheel from rotating during operation).

Features:

The maximum wheel diameter is 21″ (the specification of the Sealey stand) and the kit will accommodate a wheel width of 250mm (determined by the height of the centre post).

Bolt on 20mm diameter centre post.

The post spigot fits into the post hole of the stand and is attached by 6 x 6mm bolts/plates to the arms of the stand.

The assembly is easily reversible.

Plastic ‘ducks head’ mounted on an arm slides in to to a vertically adjustable ball bearing housing, which is free moving on the centre post and locked into position by two ‘quick’ spin thumb wheels.

Cone has a range of 20mm – 36mm (wheel bearing diameter).

3 Cam Straps provided.

Tommy Bar provided.

Bolt on tyre changing kit, no drilling, welding or cutting required.

Please note, you will not need to use the screw clamp that comes with the stand too tighten the rim into the claws, which if used will push the wheel off centre. If you are using a generic stand ensure the centre post hole of the stand is a minimum diameter of 25mm. Stand not included.